Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.
Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.
Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need find some plastic spacers that aid the new pane in being able to fit properly into the window frame.
Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor, where they could be trampled.
Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap is large, you might think about an alarm door that comes with an integrated window, as it offers the best of both worlds.
2. repairing double glazed windows is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a variety of issues that include sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.
Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows to reach the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.
If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.
uPVC handles could also become loose. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.
3. double glazed window repairs is important to take action if awake each day to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may require removal before a new layer can be applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.
It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.
Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.
It is also important to note that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and open with ease, it may be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.
Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's very simple to change a window hinge, but it's easier if someone helps you to hold the frame.
It is also important to verify that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you suggestions.
Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. upvc windows repairs recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by various factors. The hinges can also be misaligned due to wear, which can cause a gap where the sash meets frame. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it is feasible to give them a clean but in some instances it could be necessary to have these replaced.
The next most common reason for draughts is window seals. They can become worn down or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the risk of draughts.
Another, and most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric that are filled with some sort of filler and can be placed on top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!
Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it could be more cost-effective to replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as possible.